ICT Specifications.
1. Electrolytic capacitor polarity test function ECJ.
2. SMD component empty soldering test function.
3. Automatic guarding points selection function.
4. Automatic open short circuit, component learning function.
5. Pane board expansion and Pane Board automatic jump test function.
6. Windows operating interface.
7. Super powerful circuit board graphics viewing function.
8. Test report and test statistical analysis function.
Item | Description | K518W Specification | |
1 | Switch Card. | 64 Channels/Card, CMOS+ Armature Relay architecture,1:1 dischargerelay relay in each channel. | |
2 | Guarding | Max 10 points/ each step | |
3 | Running speed | Component：2ms-40ms Open/ Short：0.5s/1024 Pins. | |
4 | A/D...D/A | 14bits. | |
5 | Stimulus | AC voltage source：10mvpp-2500mvpp DC Voltage source：10mV-14.0V(3mA/25mA可选) AC/DC source current：10uA-20mA Frequency：120、1020、10K、100K、2MHZ（60HZ） 100、1K、10K、100K、2MHZ（50HZ） | |
6 | Ability | Resistor | 0.05Ω-100MΩ |
Capacitor | 1pF-40mF | ||
Inductor | 0.1uh-60H | ||
P/N Junction | 0.1-14.0V | ||
Transistor | 3 terminals Vce satulation voltage and β. | ||
FET | 3 terminals Vds,Cds or Rd（on） | ||
Photo-couple/ Relay | Four-terminal test its conduction voltage or resistance. | ||
IC empty soldering. | DR：dynamic resistor method. | ||
7 | Electrolytic Capacitor Polarity and Missing Part Test | EC Jet, 100% discrimination. | |
8 | Impedance in series and parallel | Using multi-frequency test method or amplitude-phase split method（8°-82°） | |
9 | Operating System. | Win7 Professional. | |
10 | Press unit for circuit board working size | 400mm×350mm（STANDARD） | |
11 | Machine body size | 800mm（W）×1000mm（D）×1675mm（H），Approx. 200Kgs including press unit. | |
12 | Air demand | 2-6Kgs/cm2 | |
13 | Power demand | AC100-240V | |
Tel：+86-512-6825-8529
Mobile：18262021089/13382188900
WeChat ID：13382188900
Email：charles@adsys.com.tw
Address：302, Block 15, No.158, Jinfeng Road, Suzhou New District, Jiang-Su Province, China. (215163)
Contact： Charles Chan
